1. Ставишь Аида64
2. Заходишь в раздел Компьютер, там суммарная информация, копируешь сюда
3. Когда скопируешь - можно будет думать дальше.
4. Ах да, раздел датчиков в Аиде, запускаешь в окне какую-то игрушку 3Д и смотришь напряжение по 12В линии, если ниже 11,9 - это проблема блока питания, можно просто у кого-то взять БП попробовать от 800 ватт
https://www.asus.com/ru/supportonly/p5q ... pdesk_bios P5QL-E не асрок, а асус МП.
P5QL-E BIOS v1104
Версия 1104
707.41 KB
2009/09/25
должен быть такой биос на плате.
1. Power Supply and Cabling Issues
The 1080 Ti is power-hungry, and older systems often have power supply units (PSUs) that cannot handle the 250W+ draw or lack proper cabling.
Daisy-Chain Cables: Do not use a single PCIe cable that splits into two connectors (daisy-chain). Use two separate PCIe cables from your PSU to the card.
PSU Wattage: A quality 600W-650W PSU is recommended.
Connection Check: Ensure both 6-pin and 8-pin connectors are securely plugged into the 1080 Ti.
2. BIOS and Compatibility Issues
The P5QL-E is from the Core 2 Duo/Quad era, which may cause initialization issues with modern Pascal GPUs.
BIOS Update: Update your motherboard BIOS to the latest version.
Clear CMOS: Clear the motherboard CMOS to reset BIOS settings to default, which can help resolve initialization issues.
Disable/Enable CSM: Toggle Compatibility Support Module (CSM) in the BIOS.
PCIe Slot: Ensure the card is in the top primary PCI Express x16 slot, and that the slot is clean of dust.